Gas Fires - Electric Fires

Eko 5070 Flueless Gas Fire
Product No: FS2435

• Maximum heat output of up to 2.6Kw
• 100% efficient
• Dancing flame effect
• Simple Monochromatic palette
• Glass fronted catalytic flueless wall hung portrait gas fire
• With Oxygen Depletion Sensors & Flame Failure Device
• Anthracite coloured Glass fascia
• Designed for homes without a chimney or flue
• Mounts easily onto most internal walls
• Natural gas or LPG available
• Slimline depth of only 180mm projection into the room off the face of the wall
• The Eko 5070 requires a minimum room size of 30m³ (typically 11'6" x 11'6" with an 8' high ceiling) and also requires a 100cm² of purpose provided ventilation (otherwise known as an air vent) (See optional extras section below for a price & to purchase an air vent with this product). Dimensions of air vent (mm): Internal fascia (white): w165 x h165, External cowl (terracotta): w202 x h190, CSA: w125 Ø (mm), Length:300-380 (mm)
• Click here to view the
  Eko Fires Sales Brochure
• Click here to view the
  Eko 5070 Installation Instructions
• Click here to view the
  Eko 5070 Technical Specifications

Free Delivery!

estimated delivery
7 working days

Price
Match

was £599.00
NOW £490.00

QTY

 

---

Energy Type | Eko 5070 Flueless Gas Fire

Eko Fires Natural Gas

included

Eko Liquid Propane

add £45.00

---

Controls | Eko 5070 Flueless Gas Fire

Manual Control
*Image for illustration purposes only

included

---

Extras | Eko 5070 Flueless Gas Fire

Apex 100cm2 Air Vent

add £49.00

---

Notes

		Outset			Inset
		Height	Width	Depth	Height	Width	Depth
Eko Fires 5010G		585	525	150	n/a	n/a	n/a
Eko Fires 5060 Black		475	635	150	n/a	n/a	n/a
Eko Fires 5070		600	1000	177	n/a	n/a	n/a
Eko Fires 5090		385	1100	185	n/a	n/a	n/a
Eko Fires 5510		620	495	92	555	405	155

NOTE: We always recommend that you should have a survey carried out by a Gas Safe registered gas installer, HETAS installer or qualified NICEIC electrician (whichever is applicable to the goods you intend to purchase) to check and certify the compatibility of your chimney, flue, property and or circumstances prior to purchase to avoid disappointment. *Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the existing fire has been removed. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble fuel effect and or a light coloured fireback. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear. We also recommend that you should wait until you have the goods purchased, onsite, in your possession to take accurate measurements from before proceeding to carry out any building work or create any apertures in the wall to avoid potential costly mistakes being made, as manufacturers reserve the right to alter products or specifications without any prior notice as required.