Apex Fires Liberty 10 Frameless Open Fronted Hole in the Wall Gas Fire
Product No: FS3393
- WANT TO PAY WITH PAYPAL WITH 3 EASY MONTHLY INSTALMENTS
CLICK ON THIS LINK TO VISIT OUR SISTER WEBSITE - Maximum heat output up to 6.2kW
- Fully sequential battery operated remote control as standard
- Dancing flame effect on a bed of Grey Gravel and Log Fuel Effect
- Comes with a Seamless no-frame design and Matt Black interior lining as standard
- 3D style reflective Black glass interior panel available as an optional extra to the rear of the fire which greatly enhances the flame effect & realism with additional flames reflecting off the Black glass panel to the rear of the fire (not the sides) which remain as standard in a Black metal painted finish
- Shown opposite with optional extra interior Black Glass Back panel
- Oxygen Depletion system monitors oxygen levels in the room as safety feature
- Optional extra gather hood and flue adaptor available (See optional extras below)
- Designed for homes with a class 1 chimney or 175mm metal prefabricated flue
- Additional ventilation into the room is required as the gas input is 12.5kW
- Natural gas version only
- Installation of this fire also requires a 300mm hearth in front of the appliance, although this may be at floor level (not included within the price of the fire) unless installed above 300mm from the floor
- Inset depth of 330mm
- Click here to view the
Apex Liberty 10 Flue Adaptor Dimensional Drawing - Click here to view the
Apex Liberty 10 Installation Guide
Free Delivery!
estimated delivery
15 working days
was £1,999.00
NOW £1,591.00
Hearth & Back | Apex Fires Liberty 10 Frameless Open Fronted Hole in the Wall Gas Fire
Apex Matt Black Back Panel (Sir)
with black side panels
Apex Black Glass Back Panel (Sir)
with black side panels
Fuel Effect | Apex Fires Liberty 10 Frameless Open Fronted Hole in the Wall Gas Fire
Energy Type | Apex Fires Liberty 10 Frameless Open Fronted Hole in the Wall Gas Fire
Controls | Apex Fires Liberty 10 Frameless Open Fronted Hole in the Wall Gas Fire
Extras | Apex Fires Liberty 10 Frameless Open Fronted Hole in the Wall Gas Fire
Apex Flue Adaptor for 175mm Flue liner
For illustration purposes only
Specifications | Apex Fires Liberty 10 Frameless Open Fronted Hole in the Wall Gas Fire
External Dimensions
See Below
mm
See Below
mm
See Below
mm
Output
Varies by product see details above
Details
Hole in the Wall Gas fireplaces
NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. Please note that soot deposits on a gas fire are to be expected and quite normal. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. All sizes in the table provided are in millimeters (mm). Due to the number of size measurements on this fire it is strongly recommended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to create any aperture in the wall to avoid potential mistakes being made. The Apex Fires Cirrus X2 is also referred/abbreviated to as the Apex 600 and the Apex Fires Cirrus X3 is also referred/abbreviated to the Apex 6x6 and the Apex Fires Liberty 10 is also referred/abbreviated to Apex & Liberty Frameless as seen in the manufacturers instructions which is all one of the same fire.
It is strongly recommended that heat resistant materials be used in the installation of high output gas fires such as Apex Fires which includes using special heat resistant plaster, fillers and associated products to help prevent surface cracks appearing on the face of the wall. Click on the following link for more information and to purchase such materials; 
> hole in the wall gas fires > apex fires liberty 10 frameless open fronted hole in the wall gas fire 
or Firefox 
?