Gallery Fireplaces Tulip Tiled Cast Iron Insert Product No: FS332
Free Delivery!
estimated delivery5 working days
Notes
NOTE: The Hearth thickness is 50mm. Please ensure you have a survey carried out by a qualified Corgi registered gas installer to ensure the compatibility of your chimney / flue or intended location for a powerflue version, before making any purchase to avoid disappointment. This fireplace requires a class 1 chimney, class 2 prefabricated flue or Electric for homes with no chimneys, depending on the model you select. The above fires do not normally require additional ventilation in the room. Please note that all the above sizes are in millimetres (mm). Output depends on flue-pull, diameter of flue and conditions of fireplace. The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. Ensure that the room in which the cast iron product is being installed is thoroughly dry e.g recently plastered walls cause high levels of moisture in the atmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean cast iron products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion. to minimise this it is recommended that you have your chimney swept clean and to seek advice regarding from your Corgi or Heatas engineer regarding the installation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temperature paint is used on all black finish items. This paint will eventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item. Although we (and our Manufacturers) display some products in photographs with and without a hearth the ultimate decision of whether a hearth is required or not is that of your Corgi registered gas installer, as Building regulations and Corgi regulations may differ in areas throughout the UK. However for the avoidance of doubt Gallery Fireplaces would recommend that a hearth is installed. All information contained in the website is to assist in your choice of a suitable fire and is not intended to rely on in full to organise your purchase. Before ordering please clarify with a suitably qualified installer to confirm suitability. If you would like further information on Solid Fuel, call the Solid Fuel Association on 0845 601 4406 or Email sfa@solidfuel.co.uk or to have a look at their website www.solidfuel.co.uk. Alternatively if you would like to find your nearest Hetas approved engineer, simply call HETAS on 0845 634 5626 or Email info@hetas.co.uk or to have a look at their Website www.hetas.co.uk where you will find a comprehensive list of engineer. This is not intended to be all the information required to install your fire. This can be obtained from Gallery Fireplaces themselves For more detailed information about this product visit www.galleryfireplaces.co.uk.